Visit canon.com/ijsetup/mg2522 to download and install the Canon Pixma MG 2522 Setup and enable your printer to execute various functions. canon.com/ijsetup mg2522. Go through ij.start.canon/ts3122 and download the latest full driver & software package for PIXMA TS3122 ij.start.canon ts3122 .
top of page
bottom of page
Step 1
Make sure that the printer is turned on.
Press & Hold down the [Wi-Fi] button at the top of the printer until the alarm lamp flashes once.
Step 2
Make sure that the light next to this button starts flashing blue and then go to your access point and press the [WPS] button within 2 minutes.
For exact details about starting WPS on your access point, please refer to the instruction manual.
The Wi-Fi lamp (blue) on the printer will continue flashing when searching, and the power and Wi-Fi lamp will blink when connecting to the access point.
When the printer has managed to establish a connection to your wireless network, the power and Wi-Fi lamp will stop flashing and remain lit.
Confirm Network Settings
To confirm that your printer is successfully connected to your wireless network, you can print your network settings printer if you want to:
Make sure your printer is turned on.
And then insert a sheet of A4 or Letter-sized plain paper.
Press & Hold the [Resume/cancel] button until the alarm lamp flashes 15 times, then release it.